Troubleshoot Epson Error Code 00043, Due To an Issue with Ink Cartridges

 Epson printers are in demand printer machines and always available in the tech market. Epson offers wide variety of printer range which can be used for both commercial and personal use. These printers are quite affordable compared to other brands offering same features. But just like other intricate machines, these printers also encounter some problems.

The most basic and common error is Epson printer error code 00043. In this blog we will discuss the plausible reasons and solutions to resolve the error.

Let’s start with responsible causes:

Causes behind Epson Error Code 00043

There are many common reasons which cause the Epson error 00043. Some of the basic reasons are:

Unable to setup ink Cartridges

If you are unable to setup ink cartridges then it may cause issues and you won’t be able to calibrate ink levels or replace the cartridges easily. You have to make sure that your printer doesn’t have such issues. Otherwise you will regularly see Epson error code 00043 displays again and again.

Cartridges not placed accurately

It is possible that your ink cartridges are not seated properly thus causing your Epson printer problem with errors.

Smeared Ink on Printouts

It is quite possible that ink cartridges are upset and smeared the ink on your print files while printing them out. This can cause the Epson error code 00043.

Printhead is Dirty

When your printhead is dirty it can cause serious problems to your printer. Thus, you must clean it from time to time that too carefully.

Paper Jamming

Paper jamming is a big issue and is responsible for causing many errors. It can be eliminated if you take care of few things like proper cleaning, handling papers with care.

Cartridges are Empty

Empty cartridges will not allow you to print anything at all. Thus, keep checking your ink cartridges from time to time and to make sure they are never empty.

Let’s move on and know about the solutions you can use to eliminate the errors.

Solution 1: Reset your Epson Printer

To reset your printer, you have to unplug the cables and turn off printer and reconnect them after some time.

Solution 2: Resolve the Cartridge Problems

You have to take out the cartridge and verify whether they are working fine or not. If not then replace them with new ones. To study the solutions in detail you can read more here.

Solution 3: Install New Cartridges

You can install the new cartridges, you have to take out the old ones and then place new one with in the correct sockets.

Solution 4: Restart Epson Printer

The most basic step is to restart your Epson printer and computer. It is a common solution which you can use for any error.

Solution 5: Check for Paper Chunks

Make sure to check the inside and out of your Epson printer. And, if you found any bits or chunks make sure to remove them and clean the printer thoroughly.

At the End

We hope you are successful in eliminating the error 00043. But in case, you need professional assistance to do more than that, feel free to contact us!